- #Sanyo pro xtrax multiverse projector power code
- #Sanyo pro xtrax multiverse projector power professional
In addition to the black board (green) mode, the PLC-XW65 and PLC-XW60 provides four color (red, blue, green, yellow) board modes, enabling easy projection* without using an ordinary screen. The correction range is up to 20 degrees. On-screen image size after correction is smaller than that of original. NOTE: Correction range varies depending on operation settings such as lens shift ratio, lens zoom magnification and so on. The PLC-XW60 and PLC-XW60 automatically compensates for keystone picture distortion. PLC-XW60 enables 100- inch screen projection at the shortest distance of 2.7 m. The short-focus type lens allows large screen image projections with a short throw distance. The optical zoom hardly deteriorates the image quality. PLC-XW60 is equipped with a zoom lens that allows screen size adjustment. This allows for clear projection even in a small meeting space or conference room. With the compact, light-weight body, the projector provides a brightness of 2,500 lumens (PLC-XW65),2000 Lumens (PLC-XW60). Industry’s smallest and lightest* body (264.0 (W) x 55.0 (H) x 188.0 (D) mm and 1.6 kg) offers great portability.
#Sanyo pro xtrax multiverse projector power code
Key Lock function, Pin Code Lock for security Wide angle lens with 1.2 optical zoom allows flexible positioning (1.33 - 1.62 : 1) Micro-portable projector, net weight only 1.6 kg
#Sanyo pro xtrax multiverse projector power professional
Suitable for mobile professional or travellers, the projector also features automatic keystone correction, automatic input signal detection, adjustable color mode, and more.
Ask Gary if you have any questions or would like a demonstration of the Epson projector.The smallest, lightest and brightest XGA LCD projector, the new Sanyo PLC-XW65 weighs in at only 1.6 kg. The “Dwight principle” says that the darker the room is the more likely students are to fall asleep. For most presentations you can leave most of the lights on, although you may want to turn off the front row of lights. The D-Zoom button allows you to zoom in on different parts of the image. When you are ready to use the Sanyo projector again, simpley press the “No Show” button again. 
The screen will go black and you can talk without distraction or use the OH projector.
If you want to “leave” your presentation temporarily but don’t want to turn the projector on and off, press the “No Show” button on the remote. The red light on the projector will then brighten as it cools itself down.) (When you press the power button button the first time on the RC, it will ask you again if you want to turn off the projector, so you will have to press the power button again. When finished, turn off the projector with the remote and put it back in the cabinet. 
If the computer is not already turned on, turn it on and the computers image will be projected on the screen. After a couple of seconds the name of the input should be displayed in the upper left corner of the screen. Press the button marked “input” to change the image source, or with the Kropf Center remote controls, just choose “computer” or “video”. The red light on the bottom of the projector will dim. If the projector is not already on, point the remote at the projector on the ceiling and press the power button. Turn off any other equipment in the cabinet that you turned on. (When you press the power button button the first time on the remote, it will ask you again if you want to turn off the projector, so you will have to press the power button again. The Sanyo remote does not control the VCR, DVD or volume. Insert the video tape or DVD into the player. Also make sure the selector for “Speakers A” is on and not “Speakers B”. If it is, press the “tape” button to turn it off. Make sure the red “tape” light is not on. Turn on the audio amp and select Video as the input. Select the one you want, in this case, video. By pressing “input” you will cycle back and forth between the video input and the computer input. It will be on the input that was last used. With the projectors in Kropf Center, just choose between video and computer by pressing the appropriately named button. Press the button marked “input” to change the source. When the 30 second countdown is finished the projector will be ready. Point the remote at the projector on the ceiling and press the power button. In the classrooms the remote control should be kept in the front cabinet with the audio and video equipment.
0 kommentar(er)
